NS 전기 깎는 기계 is a new type of energy-saving mechanical shearing machine. It adopts a cycloidal pinwheel reducer to drive and adopts a convenient electric appliance for electric operation. It has low noise and convenient operation and maintenance. The structure is reasonable, the shear is automatically reset, and the footswitch device is provided. The pedal is light and free. Cutting quality: the incision is straight, the sideline is straight, and there is no burr, which achieves the precision shearing effect. Electric Hand Shearing Machine

절전, 정밀 절단, 작동하기 쉽고 경제적이고 실용적이며 가격은 유압 전단기의 가격보다 저렴하지만 전기 전단기는 작업 효율이 높습니다. 전기 전단기를 사용하기 전에 기계의 균형을 유지하고 항상 오일을 채우고 오일 컵을 기름지게 유지하여 윤활하고 가볍게 작업하십시오. 일반적으로 가정용품, 가전제품, 컬러타일, 시트커팅 등에 사용됩니다.

전기 전단기 설명

1. An electric shearing machine is used for the shear sheet metal in line, metal materials should have a tensile strength of less than 450 N/mm2, and non-metallic materials including rubber, and plastics, when cut hot plate temperature should be below 50 °C, The machine can make only intermittent shear in full load, if the tensile strength is higher, the cutting thickness should be reduced.

2. Electric shearing machine is applicable to uncoiling, leveling, shearing, workshop of production line for plate processing

3. The electric shearing machine base is steel-welding, the structure is compact, good rigidity.

4. Track of blade movement is precision casting copper, less friction

5. Upper guide can adjust until achieving a good shear section, below blade can adjust via welding screw make the cutting mouth smooth

6. Feeding devices use spring pressure, the clamps have mat pieces, the pressure force is big, and not easy to damage the sheet metal surface.

7. Electric shearing machine uses a completely independent closed gearbox transmission system, move directly connection, compact structure, gear have good lubrication, low noise, and long life.

8. Electric shearing machine equipped with pneumatic clutch device.

전기 손 전단기 주요 특징

1. 전체 기계 본체는 일체형 용접 구조를 사용하여 기계의 높은 강도와 우수한 강성을 보장합니다.

2. The machine hasn’t the clutch and the flywheel. It shears the sheet metal directly driven by the magnetic brake motor. This reduces the idle time of the motor and saves energy. Electric Hand Shearing Machine

3. 기계의 구조가 간단하고 작동하기 쉽고 소비가 적습니다.

4. 전단 날은 6Cr2Si 재료를 사용하여 우수한 성능과 긴 성능 수명을 보장합니다.