Electric Plate Shear Machine For Cutting Steel adopts the overall welded frame structure and is subjected to vibration aging treatment. The machine tool has good rigidity, high precision, and good precision retention.

Electric Plate Shearing Machine Description

1.Electric shearing machine is used for the shear sheet metal in line, metal materials should be tensile strength of less than 450 N/mm2, non-metallic material including rubber, plastics, when cut hot plate temperature should below 50 °C, The machine can make only intermittent shear in full load, if the tensile strength is higher, the cutting thickness should be reduced. Electric Plate Shear

2.Electric shearing machine is applicable to uncoiling, leveling, shearing, workshop of production line for plate processing

3.Electric shearing machine base is steel-welding, the structure is compact, good rigidity.

4.Track of blade movement is precision casting copper, less friction

5.Upper guide can adjust until achieving a good shear section, below blade can adjust via welding screw make the cutting mouth smooth

6.Feeding devices use spring pressure, the clamps have mat pieces, the pressure force is big, and not easy to damage the sheet metal surface.

7.Electric shearing machine uses completely independent closed gearbox transmission system, move directly connection, compact structure, gear have good lubrication, low noise, and long life. Electric Plate Shear

8.Electric shearing machine equipped with pneumatic clutch device.

Performance Features

Electric Sheet Metal Shearing Machines adopt steel welding structure, has the advantages of simple structure, convenient operation, beautiful appearance, low energy consumption, use gear reducer can be installed or, electromagnet, footswitch can be remote control, apply to metallurgy, light industry, machinery, hardware and other 0.1~6.0mm of ordinary steel plate processing shear.

Electric Plate Shearing Machine Main Features

1. The whole machine body uses the integral weld structure, ensuring the high strength and good rigidity of the machine.

2. The machine hasn’t the clutch and the flywheel. It shears the sheet metal directly driven by the magnetic brake motor. This reduces the idle time of the motor and saves energy. Electric Plate Shear

3.The structure of the machine is simple, easy to operate, and low consumption.

4.Shearing blade uses 6Cr2Si material, ensuring good performance and long performance life.